The Probe Multiplexer can connect any of the 10 probe channels to the 6150AD just like if the respective probe would have been connected directly to the 6150AD. The probe channel can be selected manually at the Probe Multiplexer, or remotely through a command of a PC connected to the Probe Multiplexer.
From this follows that the up to 10 probe channels cannot be selected simultaneously, but one probe after the other according to a time slice method. Since you have to allow for a measuring period per channel of several seconds at least, the Probe Multiplexer is only suited to monitor different places where rapidly changing dose rates are not to be expected.
A PC connected to the Probe Multiplexer’s serial RS232 interface can select the probes and read their dose rates. This allows to monitor a total of 11 channels (the 6150AD itself and 10 probes). A standard PC software providing graphic representation of the channels is included in the delivery.
Housing: Polystyrene with lockable transparent front door, suited for wall mounting.
Temperature range: 0 to 50 °C.
Dimensions: 278 x 217 x 142.5 mm³.
Weight: ~1.8 kg excluding the 6150AD.
Power supply: 87 to 250 VAC / 50 Hz
or 7 to 30 VDC via separate jack.
Note: 6150AD, probes and probe cables are not included in the delivery.