The four-digit LED display is readable from 9 meters (30 feett) away. User-configurable alarm setpoints are easy to configure. Parameters are protected under a calibration cover, and further protected by an eight-hour battery backup. They are also stored in non-volatile memory that retains the information even if primary power is disconnected.
The controller supplies local alarms but can be connected to external alarms, strobes, camera, or other recording and monitoring devices, or put onto an Ethernet network, if desired. See Model 375 for additional detail and available options.
- Range: 0.1 to 20 μSv/hr (1 to 2000 μR/hr)
- Encased Shielded Sodium Iodide (NaI) Detector
- User-Programmable Alarms
- 8-Hour Battery Backup
LOW ALARM: (yellow LOW ALARM light and slow beep) can be set at any point from 0.0-9999
HIGH ALARM: (red HIGH ALARM light and fast beep) can be set at any point from 0.0-9999
LOW BAT: (yellow light) indicates less than 2 hours of battery power remaining
OVERLOAD: senses detector saturation (displays: “-OL-”)
OVERRANGE: radiation field being measured exceeds counting range of instrument (displays: “- – – -”)
WEIGHT: 4.7 kg (10.3 lb)
CONNECTION: 10Base-T Ethernet included